HubPwr5-CNThis supply is for the People's Republic of China. Please look at the image to make sure that the plug is correct for your wall socket. The power supply works for all models of the LinkHub and the MS PWR. The supply provides 500 mA of +12 V. The DC barrel connector measures OD: 5. 5 mm, ID: 2. 5 mm, Length: 11. 8 mm, with negative to the center post. This supply is a GlobTek model GT 41076 0612 fitted with the appropriate mains plug. The data sheet

The absolute maximum light level will become ambiguous with the amount that the Vcc falls below +5 volts

The T-Sense® is easy to install and link together using standard RJ-45 patch cables (see figure 1)

you can just ask it to report or set it to report at an interval

Compliance with medical/food safety standards

The reported value of the sensor is passed on even if the value is out of the expected range

It is also easy to use in complex 1-Wire® networks by combining the T-Sense®

Resolution

in minutes

easy to use

5°C: -40°C to +85°C

Values / Readings8192 (8-bit) or 4096 (16-bit)

The temperature range of this product is +15°C to 140°C