Raspberry Pi CaseHAT Prototyping Board Z6412A prototyping HAT that fits inside the official Raspberry Pi case! Featuring solder masked 0. 1 holes and slots for display & camera cables. Comes supplied with header, PCB and hardware. Please Note: The Raspberry Pi board and case has been used for illustration purposes only and are not included.

Tapped to suit metric M3 machine Screws

In built Alert/Evac/Chime functionality

7 sizes to choose from

first generation WiFi systems use dual band and mesh technology which can slow down your WiFi speed as you add more devices

In this configuration the amplifier output is fed into the A4489A and speaker circuits are connected directly to the zone outputs

The W2700 offers an immersive 4K UHD picture with the benefit of ample keystone correction for off centre installation

Replace bolt and tighten wing nut to suit

which comes into play in humid to hot weather conditions

With any system

The touch board is a microcontroller board with dedicated capacitive touch and MP3 decoder ICs

With added safety alerts including timed school zones

Mic inputs are 5 pin euro block including PTT contacts